DRAGON CAM- DMM

In this new version of DMM's Dragon Cam, the contact area of ​​the cam with the rock has been increased, combining it with a raw aluminum finish in the same area (without anodizing) and additional bite points, resulting in the revolutionary cams. TripleGrip. These features combine to increase the friction between the cam and the rock. The result is greater holding power, reducing the chance of the friend "walking", especially on slippery or soft rock types and/or precarious placements. Available in eight different sizes, to cover a range from 13mm to 114mm. Its cam offers the best combination to maintain strength and expansion range. A duplex cable system is used, 5mm cable at the bottom and 3.2mm at the top. This allows it to have the same flexibility up to 360º, whether the placement is vertical or horizontal. The single stem, dual axis design gives Dragon cams 360° flexibility and a substantial expansion range, increasing performance in sub-optimal locations and helping you get the part right the first time. Dragon cams hot forged thumb press provides stable handling and reduces clumsiness from gloved hands and swollen fingers. Allows Dragon to have an extendable lanyard with no strength penalty, reducing the number of quickdraws required to extend locations and minimizing frame weight.